Go toLog in Go toSign up
クーポンコード10%オフ:3avaperetail [カウントダウン]で終了
同じメールアドレスで登録してください アカウントをアクティブ化する!ヘルプが必要な場合は、私たちとチャットしてください。

Steam Crave Hadron Pro DNA250C 400W MOD with Ragnar RDTA

Steam Crave Hadron Pro Mod  is Steam Crave's first DNA 4s Li-Po Mod. FullyMax® 4s 1600mAh 30C Li-Po battery pack is pre-installed. Hadron Pro DNA 250C Mod with Li-Po 4s battery pack... 続きを読む

[カウント] 今これを見ています

Color: Black

  • Black
  • Silver
  • Gunmetal
在庫切れ
...

ペイパル、マスター、ソフォート、ビザ

Steam Crave Hadron Pro Mod  is Steam Crave's first DNA 4s Li-Po Mod. FullyMax® 4s 1600mAh 30C Li-Po battery pack is pre-installed. Hadron Pro DNA 250C Mod with Li-Po 4s battery pack is available to offer a tremendous range with a maximum wattage output of 400W

Please note that the pictures are for reference only, there might be minor changes without notice.

Product introduction
Steam Crave Hadron Pro Mod is fully enhanced with the famous original Hadron 220 Mod, this is Steam Crave's first DNA 4s Li-Po Mod. FullyMax® 4s 1600mAh 30C Li-Po battery pack is pre-installed. Even if the peak load is 30C, the battery cannot be exhausted. FullyMax® 4s 1600mAh 30C Li-Po battery has a very low profile and a lower chance of experiencing leaking electrolyte, low internal resistance, long cycle life, and safety guarantee.Hadron Pro DNA 250C Mod with Li-Po 4s battery pack is available to offer a tremendous range with a maximum wattage output of 400W to pair with nearly any available tank, aromamizer series atomizers, or rebuildable atomizer. Using the free Escribe software (which can be used to configure the Evolv DNA chip), the precise control of the device can be optimized even in the smallest details. A 0.9" Full-Color TFT display screen that displays detailed data. The integrated USB port can also easily charge the internal replaceable Li-Po 4s battery and supports firmware upgrading.The standardized 510 connection allows the operation of almost all current atomizers on Hadron Pro Mod.


Parameters:
Dimensions:59 x 36.66 x 116.1mm
Material:Zinc Alloy
Battery:LiPO battery included (1600mah, 4s)
Input Voltage:6.0V-16.8V
Battery Voltage:12V-16.8V (3.0V-4.2V, 4s)
Output Voltage:0.2V-16.8V
Power Range:1-400W
Current Range:0.5A-30A
Resistance Range: 0.1-3.0Ω
Max Charging Current:3A (2A suggested)
Temperature Range:200°F-600°F
Screen Pixel:0.9" (80*160 pixel) full Color TFT
Coil Material supported:Nickel, Titanium, SS460, SS316, KA1, Ni80, Ni90

Features:
-Watts Boost, Replay Mode, Accurate Temperature Control, Preheat
-Built-in Onboard Charger
-USB Charging and Firmware Upgrading
-Changeable built-in Battery (Li-Po 1600mAh, 4s)
-Detailed configuration is possible through Escribe software
-0.9" Full-Color TFT Display Screen
-Internal LiPO 1600mah battery, max 400W output
-Output Mode: VW, VV, TC, TCR, Bypass
-Multiple Protections
-Support Boost and Replay function
-Evolv's DNA 250C Chipset
-First DNA 4S LiPO mod from Steam Crave

Package includes:
1 x Hadron Pro DNA 250C Box Mod (Evolv logo on) (equipped with 1600mAh, 4s Li-po pack)
1 x USB Connecting cable
1 x User Manual

日曜日月曜日火曜日水曜日の木曜日金曜日土曜日
1月、2月、3月、4月、5月、6月、7月、8月、9月、10月、11月、12月
十分なアイテムがありません。残りは[max]のみです。
ショッピングカート

あなたのカートは空です。

ショップに戻る

注文メモを追加 オーダーノートの編集
配送の見積もり
クーポンを追加する

配送の見積もり

クーポンを追加する

クーポンコードはチェックアウトページで機能します

日本語

あなたが使う言語を選んでください

USD

通貨を選択してください

Steam Crave Hadron Pro DNA250C 400W MOD with Ragnar RDTA

Black
Black
$249.00